'Innovative engineering solutions delivered safely'

PEOPLE  -  HEALTH & SAFETY  -  QUALITY  -  PRIDE  -  PROVEN  -  RIGHT FIRST TIME  -  ENVIRONMENT  -  COMMITMENT  -  SERVICE  -  EXPERIENCE  -  INTEGRITY  -  KNOWLEDGE  -  EXCELLENCE

MOSS Rental

MOSS is completely independent from major equipment manufacturers and therefore impartially assesses equipment available and only supplies the most innovative product to meet our clients' requirements. As such we have developed a wide range of Specialist Machining and Hydraulic Bolt Tightening equipment which is available for service and rental.

 

The MOSS rental division offers a comprehensive range of site-ready portable machine tools and a full selection of controlled bolting/ torquing equipment, all of which are available at short notice. Our impartiality and experience of using this equipment have enabled the development of specialised machines and tooling which is not available anywhere else. Being independent allows an impartial view to better determine your specific equipment needs to suit safety, budget, technical constraints and delivery needs. Our 24hr support in conjunction with our in-house design and manufacturing facility enables MOSS to provide the best customer service.

  • O.D Mount Pipe Cutting/Bevelling Machine

    Capacity to 72" (1828mm)

  • Hydraulic Bolt Tensioning

    3/4" to 4" (16mm - 101.6mm) Bolt Diameter

  • O.D Mount Flange Facing Machine

    Capacity to 24” (609.6mm)

  • I.D Mount Flange Facing Machine

    Capacity to 138” (3500mm). Max O.D. 197" (5000mm)

  • Boring Bars

    Capacity to (69" x 118" Travel) (1.75m x 3m Travel)

  • I.D Mount Pipe End Prep Machines

    Capacity to 72" (1828mm)

  • Journal Turning Squirrels

    4" to 11.25" (101.6mm - 285mm) 0 to 16" (0mm - 406mm) Travel

  • Key Mill Machine

    Capacity to 3" wide slots x 11" Travel (75mm x 279mm Travel)

  • 2D Mill

    Capacity to 60" (1525mm) Travel

  • 3D Mill

    Capacity to 79.5" (750mm) Cross Travel x 60" x (1525mm)

  • Hydraulic Power Units

    Variable Pump 20-40lpm 8GPM

  • MAG Based Drill Machines

    ´╗┐No 2 & No 3 Morse Taper c/w variable speed & Torque Control

  • Norbar Tapping Unit

    Tapping capacity up to M75. Re Tapping up to M125 (5")

  • Van Norman Boring Machine

    Capacity up to Ø 12" (300mm) x 37" (950mm) Travel

  • Flange Spreading

    "0" (Zero) flange gap upwards

  • Torque Wrench

    1/2" to 4" (12.7mm - 101.6mm) Bolt Diameter

  • Nut Splitter

    3/4" to 3.1/2" Bolt Diameter

  • Diamond Wire

    Ø 4" to 84" (101.6mm - 2133.6 mm) Diamond Wire Saws

  • Guillotine Pipe Saws

    Ø 2" to 32" (50mm - 812.8mm) Guillotine Pipe Saws

  • Valve Turning Machines

    6" to 60" (152.4mm - 1524mm) Valves

 

 

24hr

SERVICE